Vibro Forming Table Machine & Designer Tiles

Vibro Forming Table Machine and Designer Tiles

Specifications:

Face Mix Base Mix
Capacity 100 Kg/Batch 200 Kg/Batch
Power 2 HP Motor
1440 RPM
3 HP Motor
1440 RPM
Drum Speed 35 RPM 35 RPM
Drum Size 700 MM Dia X 350 MM Height 1000 MM Dia X 350 MM Height
Wear Lining Granite Clad or Steel Plates Granite Clad or Steel Plates
Dimension L*B*H 1210*910*1050 MM 1350*910*1050 MM
Total Weight 320 Kg 430 Kg

 

Note: Vibro form Table cement tile is having two layers, first Color Mix layer and Second one Base mix.
1. Prepare color mix by pan mixer with Color Pigments, Cement, Sand & Granite Chips as per ratio.
2. Prepare Base Mix by Concrete Mixer / Pan mixer with Cement, Sand and Granite Chips.
3. Pour measured color mix into the rubber mould and place it on the first Vibro form Table Machine, by the Special type of vibration the mould automatically moves to the end of the machine.
4. Fill the mould with base mix and pass through the second Vibro form Table machine.
5. Collect rubber moulds from the end of second Vibro form Table machine with a plain sheet for normal.
drying for 6 to 12 hours ( time will vary as per climate conditions)
6. Strip out the tiles from the moulds after drying.


 
Looking for Vibro Forming Table Machine & Designer Tiles ?
© Lakshmi & Co. ( A Lakshmi Group Of Companies )
 
Desktop Site Back to top